ANSI, ASME, ASA, B16.5 SOCKET LASFLENS
KLASSE 150 / 300 / 600 / 1500
Flensafmetingen en geschatte massa's
| ANSI, ASME, ASA B16.5 150lb/sq.in.STOKLASFLENS RF | |||||||||||||
| Nominale maat |
| Buiten Diam. | Dik.van Flens | Diam.van Opgeheven Gezicht | Diam van Hub bij Basis | Lengte door hub | Diam.van Boor | Diepte van de contactdoos | Aantal gaten | Diam.van Gaten | Diam.van bouten | Diam.van Bolt Circle | ca.Gewicht Pond Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.5 | 0,44 | 1.38 | 1.19 | 0,62 | 0,88 | 0,38 | 4 | 0,62 | 1/2 | 2.38 | 1 |
| mm. | 88,9 | 11.2 | 35.1 | 30.2 | 15.7 | 22.4 | 9.7 | 15.7 | 12.7 | 60,5 | 0,5 | ||
| 3/4″ | in. | 3.88 | 0,5 | 1.69 | 1.5 | 0,62 | 1.09 | 0,44 | 4 | 0,62 | 1/2 | 2,75 | 2 |
| mm. | 98,6 | 12.7 | 42.9 | 38.1 | 15.7 | 27.7 | 11.2 | 15.7 | 12.7 | 69,9 | 1 | ||
| 1″ | in. | 4.25 | 0,56 | 2 | 1.94 | 0,69 | 1.36 | 0,5 | 4 | 0,62 | 1/2 | 3.12 | 2 |
| mm. | 108 | 14.2 | 50.8 | 49.3 | 17.5 | 34.5 | 12.7 | 15.7 | 12.7 | 79.2 | 1 | ||
| 1 1/4″ | in. | 4.62 | 0,62 | 2.5 | 2.31 | 0,81 | 1.7 | 0,56 | 4 | 0,62 | 1/2 | 3.5 | 3 |
| mm. | 117.3 | 15.7 | 63,5 | 58.7 | 20.6 | 43.2 | 14.2 | 15.7 | 12.7 | 88,9 | 1 | ||
| 1 1/2″ | in. | 5 | 0,69 | 2.88 | 2.56 | 0,88 | 1.95 | 0,62 | 4 | 0,62 | 1/2 | 3.88 | 3 |
| mm. | 127 | 17.5 | 73.2 | 65 | 22.4 | 49,5 | 15.7 | 15.7 | 12.7 | 98,6 | 1 | ||
| 2″ | in. | 6 | 0,75 | 3.62 | 3.06 | 1 | 2.44 | 0,69 | 4 | 0,75 | 5/8 | 4,75 | 5 |
| mm. | 152,4 | 19.1 | 91.9 | 77,7 | 25.4 | 62 | 17.5 | 19.1 | 15.9 | 120,7 | 2 | ||
| 2 1/2″ | in. | 7 | 0,88 | 4.12 | 3.56 | 1.12 | 2.94 | 0,75 | 4 | 0,75 | 5/8 | 5.5 | 7 |
| mm. | 177,8 | 22.4 | 104.6 | 90.4 | 28.4 | 74,7 | 19.1 | 19.1 | 15.9 | 139,7 | 3 | ||
| 3″ | in. | 7.5 | 0,94 | 5 | 4.25 | 1.19 | 3.57 | 0,81 | 4 | 0,75 | 5/8 | 6 | 8 |
| mm. | 190,5 | 23.9 | 127 | 108 | 30.2 | 90.7 | 20.6 | 19.1 | 15.9 | 152,4 | 4 | ||
| 3 1/2″ | in. | 8.5 | 0,94 | 5.5 | 4.81 | 1.25 | 4.07 |
| 8 | 0,75 | 5/8 | 7 | 11 |
| mm. | 215,9 | 23.9 | 139,7 | 122.2 | 31.8 | 103.4 |
| 19.1 | 15.9 | 177,8 | 5 | ||
| 4″ | in. | 9 | 0,94 | 6.19 | 5.31 | 1.31 | 4.57 |
| 8 | 0,75 | 5/8 | 7.5 | 13 |
| mm. | 228,6 | 23.9 | 157.2 | 134,9 | 33.3 | 116.1 |
| 19.1 | 15.9 | 190,5 | 6 | ||
| 5″ | in. | 10 | 0,94 | 7.31 | 6.44 | 1.44 | 5.66 |
| 8 | 0,88 | 3/4 | 8.5 | 15 |
| mm. | 254 | 23.9 | 185,7 | 163.6 | 36.6 | 143,8 |
| 22.4 | 19.1 | 215,9 | 7 | ||
| 6″ | in. | 11 | 1 | 8.5 | 7.56 | 1.56 | 6.72 |
| 8 | 0,88 | 3/4 | 9.5 | 19 |
| mm. | 279,4 | 25.4 | 215,9 | 192 | 39.6 | 170,7 |
| 22.4 | 19.1 | 241.3 | 9 | ||
| 8″ | in. | 13.5 | 1.12 | 10.62 | 9.69 | 1.75 | 8.72 |
| 8 | 0,88 | 3/4 | 11.75 uur | 30 |
| mm. | 342,9 | 28.4 | 269,7 | 246.1 | 44,5 | 221,5 |
| 22.4 | 19.1 | 298,5 | 14 | ||
| 10″ | in. | 16 | 1.19 | 12.75 uur | 12 | 1.94 | 10.88 |
| 12 | 1 | 7/8 | 14.25 uur | 43 |
| mm. | 406.4 | 30.2 | 323,9 | 304,8 | 49.3 | 276,4 |
| 25.4 | 22.2 | 362 | 20 | ||
| 12″ | in. | 19 | 1.25 | 15 | 14.38 | 2.19 | 12.88 |
| 12 | 1 | 7/8 | 17 | 64 |
| mm. | 482,6 | 31.8 | 381 | 365.3 | 55.6 | 327.2 |
| 25.4 | 22.2 | 431,8 | 29 | ||
| 14″ | in. | 21 | 1.38 | 16.25 uur | 15.75 | 2.25 | 14.14 |
| 12 | 1.12 | 1 | 18.75 uur | 90 |
| mm. | 533,4 | 35.1 | 412,8 | 400.1 | 57.2 | 359,2 |
| 28.4 | 25.4 | 476,3 | 41 | ||
| 16″ | in. | 23.5 | 1.44 | 18.5 | 18 | 2.5 | 16.16 |
| 16 | 1.12 | 1 | 21.25 uur | 98 |
| mm. | 596,9 | 36.6 | 469,9 | 457,2 | 63,5 | 410,5 |
| 28.4 | 25.4 | 539,8 | 44 | ||
| 18″ | in. | 25 | 1.56 | 21 | 19.88 | 2.69 | 18.18 |
| 16 | 1.25 | 1 1/8 | 22.75 uur | 130 |
| mm. | 635 | 39.6 | 533,4 | 505 | 68.3 | 461,8 |
| 31.8 | 28.6 | 577,9 | 59 | ||
| 20″ | in. | 27.5 | 1.69 | 23 | 22 | 2.88 | 20.2 |
| 20 | 1.25 | 1 1/8 | 25 | 165 |
| mm. | 698,5 | 42.9 | 584.2 | 558,8 | 73.2 | 513.1 |
| 31.8 | 28.6 | 635 | 75 | ||
| 24″ | in. | 32 | 1.88 | 27.25 uur | 26.12 | 3.25 | 24.25 uur |
| 20 | 1.38 | 1 1/4 | 29.5 | 220 |
| mm. | 812.8 | 47,8 | 692.2 | 663,4 | 82.6 | 616 |
| 35.1 | 31.8 | 749,3 | 100 | ||
OPMERKING:
(1) Wanneer deze flenzen met een plat vlak nodig zijn, kan de volledige dikte of de dikte met verwijderd verhoogd vlak worden geleverd.
Gebruikers worden eraan herinnerd dat het verwijderen van het verhoogde vlak de lengte door de naaf niet standaard zal maken.
(2) Deze afmeting is voor het grote uiteinde van de naaf, die recht of taps kan zijn.flenzen met schroefdraad, slip-on, moflas en overlappende flenzen.
(3) Socket Weld Flens Boring Maat SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS.
| ANSI, ASME, ASA B16.5 300lb/sq.in.STOKLASFLENS RF | |||||||||||||
| Nominale maat |
| Buiten Diam. | Dik.van Flens | Diam.van Opgeheven Gezicht | Diam van Hub bij Basis | Lengte door hub | Diam.van Boor | Diepte van de contactdoos | Aantal gaten | Diam.van Gaten | Diam.van bouten | Diam.van Bolt Circle | ca.Gewicht Pond Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.75 | 0,56 | 1.38 | 1.5 | 0,88 | 0,88 | 0,38 | 4 | 0,62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4″ | in. | 4.62 | 0,62 | 1.69 | 1.88 | 1 | 1.09 | 0,44 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47,8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1″ | in. | 4.88 | 0,69 | 2 | 2.12 | 1.06 | 1.36 | 0,5 | 4 | 0,75 | 5/8 | 3.5 | 3 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88,9 | 1 | ||
| 1 1/4″ | in. | 5.25 | 0,75 | 2.5 | 2.5 | 1.06 | 1.7 | 0,56 | 4 | 0,75 | 5/8 | 3.88 | 4 |
| mm. | 133,4 | 19.1 | 63,5 | 63,5 | 26.9 | 43.2 | 14.2 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2″ | in. | 6.12 | 0,81 | 2.88 | 2,75 | 1.19 | 1.95 | 0,62 | 4 | 0,88 | 3/4 | 4.5 | 6 |
| mm. | 155,4 | 20.6 | 73.2 | 69,9 | 30.2 | 49,5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | in. | 6.5 | 0,88 | 3.62 | 3.31 | 1.31 | 2.44 | 0,69 | 8 | 0,75 | 5/8 | 5 | 7 |
| mm. | 165.1 | 22.4 | 91.9 | 84.1 | 33.3 | 62 | 17.5 | 19.1 | 15.9 | 127 | 3 | ||
| 2 1/2″ | in. | 7.5 | 1 | 4.12 | 3.94 | 1.5 | 2.94 | 0,75 | 8 | 0,88 | 3/4 | 5.88 | 10 |
| mm. | 190,5 | 25.4 | 104.6 | 100.1 | 38.1 | 74,7 | 19.1 | 22.4 | 19.1 | 149,4 | 5 | ||
| 3″ | in. | 8.25 | 1.12 | 5 | 4.62 | 1.69 | 3.57 | 0,81 | 8 | 0,88 | 3/4 | 6.62 | 13 |
| mm. | 209,6 | 28.4 | 127 | 117.3 | 42.9 | 90.7 | 20.6 | 22.4 | 19.1 | 168.1 | 6 | ||
| 3 1/2″ | in. | 9 | 1.19 | 5.5 | 5.25 | 1.75 | 4.07 |
| 8 | 0,88 | 3/4 | 7.25 | 17 |
| mm. | 228,6 | 30.2 | 139,7 | 133,4 | 44,5 | 103.4 |
| 22.4 | 19.1 | 184.2 | 8 | ||
| 4″ | in. | 10 | 1.25 | 6.19 | 5,75 | 1.88 | 4.57 |
| 8 | 0,88 | 3/4 | 7.88 | 22 |
| mm. | 254 | 31.8 | 157.2 | 146.1 | 47,8 | 116.1 |
| 22.4 | 19.1 | 200,2 | 10 | ||
| 5″ | in. | 11 | 1.38 | 7.31 | 7 | 2 | 5.66 |
| 8 | 0,88 | 3/4 | 9.25 uur | 28 |
| mm. | 279,4 | 35.1 | 185,7 | 177,8 | 50.8 | 143,8 |
| 22.4 | 19.1 | 235 | 13 | ||
| 6″ | in. | 12.5 | 1.44 | 8.5 | 8.12 | 2.06 | 6.72 |
| 12 | 0,88 | 3/4 | 10.62 | 39 |
| mm. | 317,5 | 36.6 | 215,9 | 206.2 | 52.3 | 170,7 |
| 22.4 | 19.1 | 269,7 | 18 | ||
| 8″ | in. | 15 | 1.62 | 10.62 | 10.25 uur | 2.44 | 8.72 |
| 12 | 1 | 7/8 | 13 | 58 |
| mm. | 381 | 41.1 | 269,7 | 260,4 | 62 | 221,5 |
| 25.4 | 22.2 | 330.2 | 26 | ||
| 10″ | in. | 17.5 | 1.88 | 12.75 uur | 12.62 | 2.62 | 10.88 |
| 16 | 1.12 | 1 | 15.25 uur | 81 |
| mm. | 444,5 | 47,8 | 323,9 | 320,5 | 66,5 | 276,4 |
| 28.4 | 25.4 | 387,4 | 37 | ||
| 12″ | in. | 20.5 | 2 | 15 | 14.75 uur | 2.88 | 12.88 |
| 16 | 1.25 | 1 1/8 | 17.75 uur | 115 |
| mm. | 520,7 | 50.8 | 381 | 374,7 | 73.2 | 327.2 |
| 31.8 | 28.6 | 450,9 | 52 | ||
| 14″ | in. | 23 | 2.12 | 16.25 uur | 16.75 uur | 3 | 14.14 |
| 20 | 1.25 | 1 1/8 | 20.25 uur | 165 |
| mm. | 584.2 | 53.8 | 412,8 | 425,5 | 76.2 | 359,2 |
| 31.8 | 28.6 | 514.4 | 75 | ||
| 16″ | in. | 25.5 | 2.25 | 18.5 | 19 | 3.25 | 16.16 |
| 20 | 1.38 | 1 1/4 | 22.5 | 190 |
| mm. | 647,7 | 57.2 | 469,9 | 482,6 | 82.6 | 410,5 |
| 35.1 | 31.8 | 571,5 | 86 | ||
| 18″ | in. | 28 | 2.38 | 21 | 21 | 3.5 | 18.18 |
| 24 | 1.38 | 1 1/4 | 24.75 | 250 |
| mm. | 711.2 | 60,5 | 533,4 | 533,4 | 88,9 | 461,8 |
| 35.1 | 31.8 | 628,7 | 113 | ||
| 20″ | in. | 30.5 | 2.5 | 23 | 23.12 | 3.75 | 20.2 |
| 24 | 1.38 | 1 1/4 | 27 | 315 |
| mm. | 774,7 | 63,5 | 584.2 | 587.2 | 95.3 | 513.1 |
| 35.1 | 31.8 | 685,8 | 143 | ||
| 24″ | in. | 36 | 2,75 | 27.25 uur | 27.62 | 4.19 | 24.25 uur |
| 24 | 1.62 | 1 1/2 | 32 | 475 |
| mm. | 914.4 | 69,9 | 692.2 | 701.5 | 106.4 | 616 |
| 41.1 | 38.1 | 812.8 | 215 | ||
| ANSI, ASME, ASA B16.5 600lb/sq.in.STOKLASFLENS RF | |||||||||||||
| Nominale maat |
| Buiten Diam. | Dik.van Flens | Diam.van Opgeheven Gezicht | Diam van Hub bij Basis | Lengte door hub | Diam.van Boor | Diepte van de contactdoos | Aantal gaten | Diam.van Gaten | Diam.van bouten | Diam.van Bolt Circle | ca.Gewicht Pond Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.75 | 0,56 | 1.38 | 1.5 | 0,88 | 0,88 | 0,38 | 4 | 0,62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4″ | in. | 4.62 | 0,62 | 1.69 | 1.88 | 1 | 1.09 | 0,44 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47,8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1″ | in. | 4.88 | 0,69 | 2 | 2.12 | 1.06 | 1.36 | 0,5 | 4 | 0,75 | 5/8 | 3.5 | 4 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88,9 | 2 | ||
| 1 1/4″ | in. | 5.25 | 0,81 | 2.5 | 2.5 | 1.12 | 1.7 | 0,56 | 4 | 0,75 | 5/8 | 3.88 | 5 |
| mm. | 133,4 | 20.6 | 63,5 | 63,5 | 28.4 | 43.2 | 14.2 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2″ | in. | 6.12 | 0,88 | 2.88 | 2,75 | 1.25 | 1.95 | 0,62 | 4 | 0,88 | 3/4 | 4.5 | 7 |
| mm. | 155,4 | 22.4 | 73.2 | 69,9 | 31.8 | 49,5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | in. | 6.5 | 1 | 3.62 | 3.31 | 1.44 | 2.44 | 0,69 | 8 | 0,75 | 5/8 | 5 | 9 |
| mm. | 165.1 | 25.4 | 91.9 | 84.1 | 36.6 | 62 | 17.5 | 19.1 | 15.9 | 127 | 4 | ||
| 2 1/2″ | in. | 7.5 | 1.12 | 4.12 | 3.94 | 1.62 | 2.94 | 0,75 | 8 | 0,88 | 3/4 | 5.88 | 13 |
| mm. | 190,5 | 28.4 | 104.6 | 100.1 | 41.1 | 74,7 | 19.1 | 22.4 | 19.1 | 149,4 | 6 | ||
| 3″ | in. | 8.25 | 1.25 | 5 | 4.62 | 1.81 | 3.57 | 0,81 | 8 | 0,88 | 3/4 | 6.62 | 16 |
| mm. | 209,6 | 31.8 | 127 | 117.3 | 46 | 90.7 | 20.6 | 22.4 | 19.1 | 168.1 | 7 | ||
| 3 1/2″ | in. | 9 | 1.38 | 5.5 | 5.25 | 1.94 | 4.07 |
| 8 | 1 | 7/8 | 7.25 | 21 |
| mm. | 228,6 | 35.1 | 139,7 | 133,4 | 49.3 | 103.4 |
| 25.4 | 22.2 | 184.2 | 10 | ||
| 4″ | in. | 10.75 uur | 1.5 | 6.19 | 6 | 2.12 | 4.57 |
| 8 | 1 | 7/8 | 8.5 | 37 |
| mm. | 273.1 | 38.1 | 157.2 | 152,4 | 53.8 | 116.1 |
| 25.4 | 22.2 | 215,9 | 17 | ||
| 5″ | in. | 13 | 1.75 | 7.31 | 7.44 | 2.38 | 5.66 |
| 8 | 1.12 | 1 | 10.5 | 63 |
| mm. | 330.2 | 44,5 | 185,7 | 189 | 60,5 | 143,8 |
| 28.4 | 25.4 | 266,7 | 29 | ||
| 6″ | in. | 14 | 1.88 | 8.5 | 8.75 | 2.62 | 6.72 |
| 12 | 1.12 | 1 | 11.5 | 80 |
| mm. | 355,6 | 47,8 | 215,9 | 222.3 | 66,5 | 170,7 |
| 28.4 | 25.4 | 292.1 | 36 | ||
| 8″ | in. | 16.5 | 2.19 | 10.62 | 10.75 uur | 3 | 8.72 |
| 12 | 1.25 | 1 1/8 | 13.75 uur | 115 |
| mm. | 419.1 | 55.6 | 269,7 | 273.1 | 76.2 | 221,5 |
| 31.8 | 28.6 | 349,3 | 52 | ||
| 10″ | in. | 20 | 2.5 | 12.75 uur | 13.5 | 3.38 | 10.88 |
| 16 | 1.38 | 1 1/4 | 17 | 170 |
| mm. | 508 | 63,5 | 323,9 | 342,9 | 85,9 | 276,4 |
| 35.1 | 31.8 | 431,8 | 77 | ||
| 12″ | in. | 22 | 2.62 | 15 | 15.75 | 3.62 | 12.88 |
| 20 | 1.38 | 1 1/4 | 19.25 uur | 200 |
| mm. | 558,8 | 66,5 | 381 | 400.1 | 91.9 | 327.2 |
| 35.1 | 31.8 | 489 | 91 | ||
| 14″ | in. | 23.75 | 2,75 | 16.25 uur | 17 | 3.69 | 14.14 |
| 20 | 1.5 | 1 3/8 | 20.75 | 230 |
| mm. | 603.3 | 69,9 | 412,8 | 431,8 | 93,7 | 359,2 |
| 38.1 | 34.9 | 527.1 | 104 | ||
| 16″ | in. | 27 | 3 | 18.5 | 19.5 | 4.19 | 16.16 |
| 20 | 1.62 | 1 1/2 | 23.75 | 330 |
| mm. | 685,8 | 76.2 | 469,9 | 495,3 | 106.4 | 410,5 |
| 41.1 | 38.1 | 603.3 | 150 | ||
| 18″ | in. | 29.25 uur | 3.25 | 21 | 21.5 | 4.62 | 18.18 |
| 20 | 1.75 | 1 5/8 | 25.75 | 400 |
| mm. | 743 | 82.6 | 533,4 | 546.1 | 117.3 | 461,8 |
| 44,5 | 41.3 | 654.1 | 181 | ||
| 20″ | in. | 32 | 3.5 | 23 | 24 | 5 | 20.2 |
| 24 | 1.75 | 1 5/8 | 28.5 | 510 |
| mm. | 812.8 | 88,9 | 584.2 | 609,6 | 127 | 513.1 |
| 44,5 | 41.3 | 723,9 | 231 | ||
| 24″ | in. | 37 | 4 | 27.25 uur | 28.25 uur | 5.5 | 24.25 uur |
| 24 | 2 | 1 7/8 | 33 | 730 |
| mm. | 939,8 | 101.6 | 692.2 | 717,6 | 139,7 | 616 |
| 50.8 | 47.6 | 838.2 | 331 | ||
Productiecapaciteit en aankoopdetails
1. Afmeting toevoerflens DN15 – DN2000 (1/2″ – 80″), gesmede flens.
2. Materiaal Koolstofstaal: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn enz.
3. Materiaal roestvrij staal: ASTM A182 F304, F304L, F316, F316L, F321 enz.
4. Flenzen Antiroest: antiroestolie, zwarte verf, gele verfcoating, thermisch verzinkt, koud verzinkt enz.
5. Maandelijkse output: 3000 ton per maand.
6. Leveringsvoorwaarden: CIF, CFR, FOB, EXW.
7. Betalingsvoorwaarden: overboeking (T/T), onherroepelijke L/C op zicht enz.
8. Minimale bestelhoeveelheid: 1 ton of 100 stuks.
9. Kwaliteitsgarantie: EN10204 3.1-certificaat, molencertificaat, inspectie door derden, gratis vervangingsservice.
10. Vind meer vereisten in de markt voor flenzen.